TensorGrip X40 Acoustic Panel Spray Adhesive


SKU: TG-X40 Categories: ,

TensorGrip X40 Acoustic Panel Spray Adhesive


TensorGrip X40 has been developed alongside innovative leaders of the acoustic indusrty. Specially formulated for Autex Quietspace Panels, Cube and Ceiling Tiles. Ordio Acoustics highly recommends TensorGrip X40 Acoustic Spray Adhesive for both domestic and commercial applications.


TensorGrip X40 can also be used for thinner products such as Quietspace Composition Acoustic Fabric, Symphony, Vertiface and Etch. The key advantage of x40 is the fast drying, high tac performance of which is critical for thicker, dense products.


TensorGrip X40 Directions For Use


Like all typical contact adhesives, this product is designed to be applied to two surfaces to be bonded together. Ordio Acoustics in conjunction with Autex always advise all installers to thoroughly prepare all surfaces prior to applying X40.


The most effective way to ensure that the surface is free from dirt, dust, oil, loose paint, wax or grease, etc always use sugar soap and wait until the surface is full dry. The environmental conditions are also vital to ensure best results. The  temperature of the adhesive and the surfaces being bonded should be between 60 degrees F – 80 degrees F (16degrees C – 27 degrees C).


TensorGrip X40 Installation Tips


Just because the X4o canister or Aerosol cans are gas injected we highly recommend shaking the canister or can well before using. As for the spray gun and hose kit remember to attach and secure the hose tightly onto the spray gun with required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and fully, check for leaks during this process. Unlock the trigger on the spray gun to start spraying.


TensorGrip X40 MSDS & TDS Documents


Please download the TensorGrip X40 MSDS and TDS PDF documents via the downloads section within this page for additional information. If you require any further paperwork or need special clearance for delivery due to the Class 2 DG classification of this product, please contact Ben Wever from Ordio Acoustics.


Ordio Productions is a proud authorised and preferred dealer of  all TensorGrip products.


  • Non-Flammable adhesive
  • Low VOC
  • Excellent high coverage of up to 230m2 per 22ltr canister
  • 80% of final strength achieved immediately upon bonding
  • Open time allows for repositionability for panel alignment prior to bonding
  • Can be tinted for visability of application coverage
  • Full strength achieved in 24 hours, high strength long-term bond
  • Fast drying 3-4 mins with excellent initial green strength bond
  • High tack – adheres aggressively to nearly any surface
  • Long open time 45-60 mins
  • High (105°C) temperature heat resistant
  • Low odour – suitable for Building Sites
  • Low atomisation limiting overspray
  • Portable airless self sufficient aerosol canister spray
  • System with adjustable spray patterns
Additional Information
Weight 18 kg
Dimensions 50 × 50 × 50 cm

TensorGrip X40 Has Been Developed For:

  • Brick
  • Concrete
  • Drywall
  • Insulation
  • MDF

TensorGrip X40 Properties

  • Web Spray