Products

TensorGrip F31 High Temp Foam Upholstery Adhesive

$54.00$490.00

  • Product lead time is 2-3 days
  • Minimum order is 1 x canister
  • Minimum order is 12 x aerosol cans
  • Dangerous goods fee included
  • Quantity discounts available
Clear
Description

TensorGrip F31 High Temp Foam Upholstery Adhesive

 

TensorGrip F31 is a high performance spray adhesive developed for demanding foam, fabric, leather and upholstery applications. Its tough curing properties and high temperature resistance give ultra-strong bond adhesion when working in high demand, bespoke upholstery applications, ensuring longevity and excellent, integral bond results.

 

TensorGrip F31 is ideal for wall and ceiling installation of Autex Cube, Autex Quietspace Fabric, Autex Quietspace Panel, industrial foam, fabric, leather and upholstery applications.

 

Directions for use

 

This product is designed to be applied to two surfaces to be bonded together. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc. For best results, the temperature of the adhesive and the surfaces being bonded should be between 60 degrees F – 80 degrees F (16degrees C – 27 degrees C).

 

TensorGrip F31 is to be used with adequate ventilation. When possible we recommend shaking the canister well before using. Attach and secure hose tightly onto the spray gun with required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and fully, check for leaks during this process. Unlock the trigger on the spray gun to start spraying.

 

Prior to use, Check compatibility by spraying a small test patch of the adhesive on the substrate. This product may degrade some substrates. Spray about 10-20 cm (4” – 8”) away at a 90 degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. When using TensorGrip F31 Fast High Temp Drying Adhesive spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched.

 

Ordio Productions are an authorised and preferred dealer of TensorGrip products.

Features
  • Exceptional, tough curing bond lines
  • „High temperature resistance – 118°C
  • Fine web spray pattern reducing bleed through on thin fabrics
  • Highly controllable spray pattern for varying surface areas
  • Excellent green strength and low odour
Additional Information
Weight 18 kg
Dimensions 50 × 50 × 50 cm
Applications
  • Autex Quietspace Products
  • Fabric
  • Foam
  • Thin Fabric
  • Synthetic Leather
Downloads
Brochure
pdf-download-brochure